Best Spray Paint Review – Everything You Need to Know
Applying paints to your home or any object gives a sense of freshness, completion, and increases the value. Paints are used as final finishes to any surfaces with an aim to decorate and protect them. When we talk about painting, a brush and a roller are what come to our mind. But what about those large and intricate surface detail? ‘Spray Paint’ is what gives a smoother, uniform paint surface and less tedious than brush painting. There are two types of sprayer units – air-powered and airless. The air-powered units can be expensive as they require an air gun and a compressor unit while an airless one is quite economical as they do not require many accessories. However, the airless units may not be good for getting a really smooth finish as they produce sprays with large particles.
Well! Before proceeding further, we should have a deep understanding about the spray painting…
What is Spray Painting?
Spray painting is a painting technique where a device sprays a color coating onto a surface through the air. The spray paint can be categorized as air gun spraying, electrostatic spray painting, electric fan, and airless spray. Available in a wide range of colors, spray paints make it easy to create a wonderful look. It can be used to repair scratched and nicks in car finishes as well as provide easy protection from the weather for different items. It is the ‘go-to’ paint for many people especially to touch something up or finish a small project.
Why Consider Spray Painting?
Spray painting is becoming increasingly popular across the world as it offers a lot of benefits such as:
- Ease of Application – Whether it be or residential or commercial purpose, spray painting is extremely easy to apply. It is often used for store fronts and surfaces that require an appealing ‘Point of Sale’ as the paint is applied using a high powered spraying machine that coats the surface smoothly with no air bubbles.
- Clean & Easy – Using traditional methods during times when you are in hurry may ruin everything as it splatters everywhere. Whereas, spray painting removes the dangers of paint splattering all over the workspace as the machines coat the areas at a pace and level that is easy and even.
- Affordable – Earlier spray painting was expensive as it was not as popular as these days but with its increasing popularity it has become a lot more affordable. With this painting, the extra work required is minimal as it covers an entire surface a lot quicker. As the job is done quickly, it saves time.
Before proceeding further, let’s compare and know about the best spray paint products and make the most informed decision:
1. Krylon K01306 Workable Fixatif Spray Clear
The matte finish spray paint is designed to provide unbeatable protection to computer prints, pencil, pastel and chalk drawings. It prevents wrinkling, smudging, and known for allowing easy reworking of the artwork. The acid-free and archival safe paint provide clear and durable finish and can be erased through the coating to rework artwork. The non-wrinkling and non-yellowing color dries in just 30 minutes. It is also good for watercolor paintings including oil, wax-based pencils, acrylics, pastels, and just about anything.
However, just like other paints, there are some cautions to make sure you get it right without sacrificing with your health. It is recommended to use it outdoors, with a mask over your face to protect from fumes. Also, keep it away from the reach of children as it consists of some toxic ingredients.
2. Rust-Oleum Spray Paint
The Rust-Oleum 7776830 stops rust spray paint is designed to protect exterior/interior surfaces like metal, concrete, masonry, and wood from corrosion and extreme weather conditions. This oil-based formula provides a protective coating with resistance to rust, abrasion, fading, and chipping. The paint offers a flat finish and takes 2 to 4 hours to dry.
Available in a wide variety of colors and finishes, this spray paint features any-angle technology which means that you can use it easily even in hard-to-reach areas. As it gives a mirror shine, some of the best ways to use this paint are on metal fence gates, chairs, and tables, car wheels, truck frames BBQ, exterior lights, mailbox, and industrial equipment.
Just like other toxic products, this paint color also needs some attention so that your health remains at its best. Also, be aware that this paint runs very thin compared to the other colors. Coat a few extra times to get a smooth finish and a good color.
3. Dupli-Color High-Performance Vinyl and Fabric Spray
The Dupli-Color EHVP10600 flat black high-performance Vinyl and Fabric spray would not crack, peel or chip. As the paint is formulated with a maximum adhesion promoter, no primer is required before applying. The fast drying spray color is an ideal option for dressing up your old interior vinyl and fabric like vinyl seats, door panels, dashes, shifter boots and consoles. Best of all, this paint is available in many of the original equipment colors and hot tuner colors.
The paint features EZ Touch Conical Nozzle and flexible self-priming formula for providing a smooth finish. This paint is one of the best spray paints and guaranteed to work on nearly any surface. However, a little care of the product you want to spray paint is important.
4. Super Clear UV Cut Flat Spray
The Mr. Super clear UV cut flat spray by Bluefin Distribution Toys is designed to be effectively used with Mr. Color and hobby paints. The sealant formula provides maximum UV protection and can be used after painting to give any object a lasting appeal. It simply means that the UV-Cut series gives protection against harmful Ultra-Violet rays and prevents color from yellowing over time. The paint gives a flat coat matte finish and can be used for art projects or doll repainting. If used properly, it can be a great spray paint for hobby projects.
As the paint is flammable, an appropriate care while handling and applying it is crucial. It is recommended to use the spray paint in a ventilated area and handle with proper care. You may require a safety respirator because even in a well-ventilated area you’re still inhaling the harmful chemicals.
5. VHT Nite-Shades Lens Cover Tint Translucent Black Paint Can
The SP999 Nite-Shades Lens Cove Tint Translucent black paint can from VHT is designed for creating custom European styling. The Nite shades is a transparent black tail light lens coating and recommended for off-road use only. The smooth finish spray paint when applied to fog lights, tail lights, or turn indicators, makes them appear black until they are lit.
That’s why the paint is recommended for off-road use. The VHT Nite-Shades are also used to restore faded or scratched lenses. It dries in just 1 hour and no curing is required if you leave it overnight. The color looks flat black until you finish it and will cause the object to have an acid washed effect with a blue overtone.
Well! Talking about the precautions you should take while using it, it needs to be handled carefully means you should wear a mask. Also, try spraying a sample before you do your lights and see if it satisfies your requirement. Before you spray, make sure there’s no grease or wax on your lens.
Here are a few Rust Prevention Paints:
1. POR-15 Silver Rust Preventive Coating
The POR-15 45308 Silver Rust Preventive Coating is designed in a way that it self-levels when applied with a brush. Paint it directly over rust and it seals it permanently. The formula is designed for professional use and for metal substrates only. The paint completely waterproofs the product and offer chemical, stain, and impact resistance.
Also, it quickly adapts to the expansion and shrinkage of surface caused by temperature changes. Best of all, when applied appropriately it does not crack, chip, or peel from the surface. It totally eliminates the need for a sacrificial zinc primer system.
For best results, it is recommended to use the paint carefully while keeping it away from eyes and the reach of kids. The fumes are extremely strong even when hand-brushed so it’s good to wear a respirator.
2. KBS Coatings loss Black RustSeal Paint
The 4401 Gloss Black RustSeal paint by KBS Coatings is known for its proven rust prevention. This ready-to-use, non-porous paint comes with exceptional sealing properties. It is a single component, high solids content that is made of advanced color formulations to prevent corrosion and stop rust. It completely seals metal surfaces by blocking all the pores and preventing penetration of moisture, oxygen, and water vapor. As the water and air are locked, even the longer exposure to moisture cannot take hold. The anti-corrosion paint bonds to bare metal to form a permanent, moisture resistant finish that is flexible but won’t chip, peel, or crack.
To get great rust prevention, doing it right is imperative and for this you should apply the paint directly over treated rust. However, you have to be cautious while dealing with this paint as just like other products it also has some chemical properties.
Here’s a Paint that can withstand even High Temperatures:
1. Rust-Oleum Automotive High Heat Spray Paint
The Automotive 12-ounce high heat spray paint by Rust-Oleum can withstand up to 2000 degree F. This gas and oil resistant paint is designed for the industrial purpose and therefore ideal for automotive parts exposed to intermittent temperatures. The rust preventive formula resists oil, gas, grease, and other elements like rust, humidity, and salt.
The paint not only renews the surfaces but also provide them with protective shield to withstand high temperature, rust, and corrosion. Featuring a comfort spray tip with wider finger pad, the paint reduces the fatigue caused by continuous spraying.
It is recommended to use the product with the utmost care to enjoy great results and it works well on fireplace vents, cover up worn out metals, exhausts, and more.
Here’s a Mold Resistant Paint that Adds a Great Value:
Rust-Oleum Mold Killing Primer Quart
The Rust-Oleum 276087 Mold Killing Primer Quart is designed to kill existing mold, mildew, and odor-causing bacteria. This product gives Fungicidal Protective Coating to the surface it is applied. The water-based fungicidal protective coating can be used to paint over all existing mold, mildew, moss, fungi and any other fungal organisms.
The mold killing primer contains an EPA registered antimicrobial to prevent the growth of fungal organisms on the painted surface. Apart from this, this paint also provides excellent covering residual microbiological and fungal stains. As the paint is made to kill the existing mold, mildew, and other fungal organisms, you can paint it directly over the surface.
The product is very easy to work with and covers well when used as per the instructions. As the intent is for a coating to kill and prevent recurrence of mold, mildew, and bacteria, it may have certain health effects and therefore it is recommended to wear a mask while using it.
Here are the Slip-Resistant Paints for a Variety of Surfaces:
Anvil Deck-A-New Resurfacer Paint
The Deck-A-New paint by Anvil Paints & Coatings is designed to restore wood decks, porches, concrete patios and pool decks. This is ideal for the mentioned surfaces because it is an anti-slip paint that rejuvenates weathered or damaged wood and concrete surfaces. It saves you a lot of time and money that you may end up spending on the replacement.
The paint protects both interior and exterior wood and concrete surfaces with textured acrylic durability and can withstand even the harsh climate conditions. This eco-friendly coating delivers a slip resistant finish that is scuff, peel, and chip resistant.
Talking about the wooden surfaces, the Deck-A-New paint replace rotting or unusable decking boards and remove all loose splinters. However you need to be a bit attentive while using it on wood and clean the surface to remove mildew, dirt, and oil prior to painting. It is recommended to use water proofer bonding primer prior to application.
Coming to the concrete surfaces, it should be cured and cleaned before applying the Deck-A-New paint.
For best results, it is recommended to follow the safety precautions and instructions carefully. You should apply two coats with the help of brush, roller or texture sprayer. If you are using it for extremely weathered or damaged wood decks, it would be better to apply with a nylon-loop textured roller.
RTG Shower & Tub Non-Slip Paint
The Shower & Tub non-slip paint by RTG is designed to prevent slips and falls in showers and bathtubs. The slip-resistant paint is known to give an attractive look and long-lasting finish to the surface it is applied. The water-based traction coating provides a comfortable, sure footing in Showers and bathtubs which reduces slip and fall risk. As far as the application is concerned, it is very easy to apply by brush or roller on acrylic, enamel, and fiberglass.
The low-odor, low-VOC, and Eco-friendly paint is ready for use just after 24 hours after applying and ideal for indoor use. The paint is available in a variety of colors such as White, Cream, Light Gray, and Clear/Amber. The non-abrasive traction is comfortable against the skin and put safety first with a unique formula.
To enjoy best results, just stir well and use a brush or roller to apply to properly prepared acrylic, fiberglass, or enamel surfaces. It is recommended to paint 2-3 coats in a single day for added traction and safety. Though the paint has no nasty fumes or toxins, it is still advised to wear a mask while spraying.
How to Choose the Best Spray Paint?
One of the most important parts of any surface is the final coating and choosing the best spray paint is not that easy. As spray paint will add that shine and protective layer to a wide variety of surfaces, you need to choose the best.
To help you decide, here are some important qualities that you need to consider when looking for the best spray paint for different surfaces:
Protection – The function of the spray paint is not only to make any surface look shiny and new, but also add a protection layer. The right paint should have qualities like rust prevention, anti-corrosion, heat insulation, mold resistant, slip resistance and more. It should protect your surfaces from weather and chemical processes that could affect how they look. The paint that stops mold and rust from spreading; it would be the right choice for your next DIY project as it will be protecting the surface from further damage.
Ease of Application – It really matters that how easy the paint is to apply especially when you are not a pro but a DIYer. If you have decided to do it yourself, you need to choose the best spray paint that is easy to apply and dries to touch quickly. To make that the paint you have chosen is an easy breeze; check the manufacturer’s instructions or you may also check the reviews by previous customers. This will help you get a clear idea about the application of the spray paint.
Covering & Durability – Whatever texture or color you choose, spray paints should cover the surface uniformly with the finish smooth and uniform. It must be resistant to regular wear and tear like molds, corrosion, heat, or any external effects such as rain, sun etc. The surface on which you have applied the paint should maintain the smoothness, color, and finish for a longer period of time.
Decorative & Easy to Clean – We often use spray paints to enhance the look of any object or surface or to create a different and vivid atmosphere. Whatever texture you choose like glossy, matte, sating or silky smooth, it should do what it has promised. Furthermore, the spray paint you are going to use to decorate or protect the surfaces, it should be easy to clean and maintain. A good paint should not react chemically with the materials. However, you still need to use paints with great care as they may be harmful to your health.
Practical & Cost Effective – Cheap or cost-effective does not mean lowest quality product but it means that the price of the product should justify its quality and features. Spending a fortune on low-quality spray paints or looking for a cheap but highest quality product will be wrong in anyway. Instead, you should compare different options and choose the best one that suits your requirements and budget. Make sure it is affordable, long-lasting and ready to use. However, do not consider price as the only deciding factor when choosing spray paints.
Environment-Friendly – The most important thing that should never be ignored is that the paint is eco-friendly. It should be water based and not have any type of plasticizers or harmful chemicals or solvents. When it comes to interior and exterior painting, zero or low-VOC paints can be a great option. VOC stands for Volatile Organic Compounds that are created and dispersed into the air by a number of sources. VOC’s are generally used in the paints to keep them in a liquid state.
Types of Spray Paint – Choosing & Using
If you find painting with brush time consuming, spray paint can be an excellent alternative. But, choosing the best spray paint when choices are endless can be quite challenging. This piece of writing will help you pick the type of paint best suited for your project:
Enamel – It offers a hard finish and ideal for appliances, metal cabinets, and outdoor tables. This oil-based is often used to resurface or recoat the surfaces to make them look and feel brand new again. This paint will often last longer due to the polymers within, but you may need up to two coats. It is generally not used on its own but more like the finishing touch over another coat of paint as it adds shine and luster. It may have a glossy or semi-glossy finish.
Vinyl – It renews the aesthetic appeal of vinyl upholstery and ideal to apply on the car and boat seats, dashboards, luggage etc. Made of a combination of plastic and water, this paint is lightweight and mostly recommended to use for floors and siding. It may be waterproof and weatherproof depending on the type of buy. There are three popular types: vinyl soft sheen, vinyl silk, and vinyl matte that you can choose as per your needs and budget.
Acrylic – Known for its short drying time, the acrylic spray paint is recommended for ceilings, trim, and wooden surfaces. It is generally available with a gloss, semi-gloss, flat, satin, and eggshell finish. Acrylic gloss works well with wooden surfaces and the semi-gloss has a strong sheen. Acrylic satin can be a good choice for creating a surface that is shiny and smooth.
Lacquer – Provides a hard, high-luster, and polished finish that is perfect to be used on a piece of furniture. However, larger surfaces may need multiple coatings to get that shiny and smooth finish. This paint prevents dirt and oil from damaging the surface and can be extremely shiny depending on the brand or type you buy. It is available in a resin and matte finish where the resin one makes the paint heavier while the matte finish reduces shine.
Latex – Known for its quick drying period, the latex paint comes with synthetic polymers and you may need to mix with water to lighten the consistency. It is compatible with most types of paint sprayers and can be applied on a continuous basis.
High-Heat – Formulated to withstand extreme heat and ideal for use on auto engines and grills, the high-heat spray paint can be the best type of paint. Though it is not applicable for every type of painting job, it is ideal for the fireplace, heater, or any surface that gets very warm. Normal high-heat paint can withstand temperatures up to 1200 degree F and more.
Rust-Preventive Paint – It keeps the metal surfaces looking their best by protecting them from rust and therefore best to use for outdoor projects. It works well on surfaces that could rust over time such as bikes, cars, grills, and other metal equipment.
Why Invest in Spray Paint?
Spray paint is the best option for a quick and easy paint job for both indoor and outdoor projects. This technique has become extremely popular these days as painting with a brush can be very time-consuming. To accomplish painting jobs in record time, spray paint is the only formula that is easy to apply, rust-resistant, durable, and quickly dries.
If you are still confused whether or not to spend your money on spray paint, take a look at some the following benefits:
- Can be used on a wide range of materials, both indoors and outdoors
- Available in a wide range of colors, textures, and finishes
- Formulated to dry quickly, provide a smooth finish, and act as a protective layer
- Works well on the different type of surfaces such as metal, plastic, wood, wicker and masonry
- Available in a wide variety of finishes such as glossy, matter, satin, antique, textured, metallic and more
- Available with paint and primer in one as well as in on-trend premium colors and finishes
- Ideal for both indoor and outdoor surfaces
- Rust-preventive paint resists cracking, fading, and controls rust accumulation
- Provides corrosion protection and withstand demanding exterior environments
- Also available in professional grade and industrial use
- Professional paints dry quickly and provide outstanding coverage
- Special use paints for unique application and surface designs
- Provide effects like glitter surfaces, lacquer finishes, metallic or fluorescent looks
- Stick to high heat surfaces without losing the gloss
- Available in all price categories
How to Use Spray Paint?
Spray paint requires little attention to achieve great results and there are also cases where you will need to do a little prep work. To make the best use of these paints, always read the instructions carefully and follow them closely.
The following tips will help you get your painting job done correctly and safely:
Tip #1: Prep before Painting – It will be better to prepare the surface before painting to prevent overspray. Remove rust or lose paint with a brush and cover nearby items to prevent spray. If the surface allows, lightly sand glass before painting. The wood surface needs to be sanded and wipes clean. Also, shake the paint can well before applying to ensure it is properly mixed.
Tip #2: Work in a Ventilated Area – Always work in a well-ventilated area with windows and doors open as spray paint may consist of some harmful chemicals. Wear a safety mask before applying the paint on any surface and keep the kids away from the site. Also, work with plenty of light so you can be sure you apply the paint evenly.
Tip #3: Go with Instructions – Apply several light coats to the surface only when it is mentioned because some paints does not require to be over sprayed. Also, some paints require that they are applied after a few hours of the initial application. After painting, allow the surface to fully dry and wipe off the spray tip to prevent clogging.
For only a few dollars, paint transforms nearly anything into something aesthetically beautiful and practical. Well! With your paint sprayer and surface ready, which paint should you pick for the job? With so many spray paint options available in the market, it can be difficult to pick the right one but an informed decision always pays off. I would recommend comparing the features, qualities, and price of different products to know what works best for your painting job. By having a good knowledge of spray paints and understating of the different types, you can pick the best spray paint for your project…